Final fall, Silca launched their Tour de France Stage-winning hole 3D-printed titanium derailleur hangers to most of the people. However they had been principally restricted to riders with Shimano drivetrains or UDH-equipped bikes – critically limiting on-road functions. Properly, Silca listened. And after rapidly promoting out these preliminary ti hangers, they’re again with common matches for 9 in style street & gravel bike makers. And the unique run can be found once more too.
Do you suppose an $85-99 titanium substitute derailleur hanger will enhance your bike’s shifting?
Silca 3D-printed titanium derailleur hanger matches extra bikes
Developed as a venture to enhance the shifting on WorldTour street bikes… a lighter, stiffer hanger improve promising sooner, extra exact shifts in your street, gravel, and mountain bikes…
Silca claims that “fashionable digital derailleurs shift so quick and with such drive that standard hangers made out of low-grade aluminum plates will flex as much as 4 levels throughout a shift, leading to much less exact, noisier, and slower shifting. Conventional hangers additionally bend simply, even in minor incidents, leading to pointless bike modifications and extra workload for mechanics.“
If you happen to had a Shimano derailleur, these direct mount hangers promised sooner, extra exact shifting. Silca promised a whopping 8-10x increased stiffness when utilizing the direct mount ti hanger vs. a regular replaceable aluminum hanger and the additional hyperlink on the derailleur. On a UDH-compatible bike, they stated their hole 3D-printed titanium hanger was “5-6x stiffer than standard aluminum hangers”. We assume these quoted UDH positive factors will apply to their new common match derailleur hangers for extra street and gravel bikes, too.
Appears like a no brainer improve, proper?
In fact, the 3D-printed hanger is supposed to be a sacrificial aspect that breaks earlier than your body does. However Silca assures that though their ti hangers are ultra-stiff, there’s nonetheless an inner construction designed to interrupt earlier than your body.
So, what’s new?
The brand new bit right here is, that Silca broaden their providing for a similar 9 bike makers as earlier than. So, you possibly can both get a 100-series Shimano direct-mount-specific hanger. Or get a 200-series Common Match one which you should use with SRAM, Campagnolo, MicroShift, TRP, Ingrid, or no matter you’ve mendacity round…
Plus, there’s nonetheless the Shimano or Common Match choice for UDH bikes.
And they’re all in inventory once more.
Or in the event you had a UDH-compatible body, you might use one with both any standard derailleur or a Shimano Direct Mount.
Silca 3D-printed derailleur hanger – Pricing, choices & availability
The Silca 3DP Derailleur Hanger is out there to suit 9 manufacturers of bikes for $85 a chunk. That then, contains Cannondale, Canyon, Cervelo, Issue, Large, Pinarello, Scott, Specialised & Trek. Try our authentic Silca 3d-printed derailleur hanger article for a full breakdown of appropriate bike fashions.
Decide from 100-series for Shimano or 200-series for Common Match for SRAM, Campagnolo or different drivetrains. UDH-compatible hangers are additionally obtainable for $99 in Shimano-specific or Common Match.
